About PCL Group
PCL Group designs and builds CNC cutting machines and robotic welding systems in Jinan, Shandong. Our equipment cuts beams, tube, pipe, and plate and welds the assemblies they become. We work with structural steel, HVAC, and machinery manufacturers that need a standalone machine or equipment for several stages of production.

What we build
Start with the part and the operations it needs. A beam shop may cut copes, bolt holes, and weld access holes on the same machine. A pipe shop needs to check how the pipe is held and whether the torch can reach each branch or bevel. Those differences determine which machines are worth comparing.
Beam and section cutting
Compare machines for cutting structural profiles to length and adding copes, holes, and bevels.
Tube and pipe
Choose by section shape, size range, wall thickness, and the joints you need to make.
Plate cutting
Compare fiber laser and plasma by plate size, thickness, edge requirements, and the parts you run most often.
Robotic welding
Choose a welding setup by part size, joint access, fixtures, and how often the shop changes jobs.
From your drawing to factory testing
- Review the work. Send a drawing, the material grade, and your smallest and largest parts. Include the operation that takes the most time or causes the most rework today.
- Agree on a sample. Pick a part that represents your production, such as a beam with a cope and bolt holes or a pipe joint that is hard to fit. Agree on what to check on the finished part.
- Review the proposal. Check the machine configuration, loading space, utilities, and foundation requirements. The quotation should show what is included and which options are priced separately.
- Run the machine before shipment. Review the test results at the factory in Jinan or by video. Where fit-up matters, compare the sample with the drawing and check the mating parts together.
- Plan installation and training. Agree on site preparation, who will install the machine, and what operators need to learn before production starts.
Factory checks and documentation
A useful acceptance test starts with the drawing and ends with a part you can measure. For beam cutting, that may mean checking bolt-hole position and cope geometry. For beveling, check the angle, root face, and fit-up. For welding, agree on the joint preparation, fixture, and inspection criteria before the trial.
Ask for the inspection record and the CE or ISO documentation relevant to the equipment in your quotation. Confirm which manuals, spare-parts lists, and maintenance instructions are supplied with the machine.
Engineering and software
Send a file your shop already uses. On a compatible beam line, a DSTV file exported from Tekla Structures can carry contours, holes, and marks to the machine. An HVAC job may start with nested duct profiles, while a teaching-free welding project depends on how the system identifies seams from the available model or scan.
During the trial, ask to see the operator go from file import to the first finished part. That shows what the software handles and where the operator still needs to enter information, set a fixture, or confirm the operation.
After the machine arrives
PCL provides installation and operator training, with on-site or remote arrangements agreed for the project. Training can cover setup, a first production run, routine maintenance, and what to check when the machine stops or the cut changes.
Spare parts are supplied from Jinan. Ask for the warranty and service terms for your specific configuration, including which items are covered and how to request support after commissioning.

See a PCL line in production
Frequently asked questions
Where is PCL Group based?
Our factory is in Yuanzhuang Industrial Park, Shizhong District, Jinan, Shandong, China.
Can I buy one machine or plan a complete line?
Both. If you are planning a line, send the operations you already perform in-house and the steps you want to add. That helps us review how parts will move between cutting, fit-up, and welding.
Can you test my part before I order?
Send the drawing, material, and the feature you want to check. We can agree on a representative cut or weld and review the result with you.
How do I verify a quotation is from PCL?
Use the contact details below to confirm the quotation with our team, especially if the equipment photos or videos came from a reseller.
Contact the factory
To discuss a machine or arrange a factory visit, send your drawing, section sizes, and expected quantities. If you are replacing equipment, include the operation you want to improve.
Yuanzhuang Industrial Park, Shizhong District, Jinan, Shandong, China
