CNC cutting & robotic welding systems · Jinan, China · Since 2006info@laser-solution.com

H-Series · robotic beam coping

H series CNC Beam cutting machine

H-Beam Coping Machine: Robotic Plasma and Oxy-Fuel Beam Profile Cutting

H, I, U and L sections, web height 100-800 mm

A dedicated beam coping machine, also known as a plasma coping machine, for structural steel. A 6-axis industrial robot carries a plasma or oxy-fuel torch round H-beams, I-beams, channels and angles, cutting copes, weld access holes, bevels, notches and bolt holes in one station. Without a chuck, sections feed straight through, which keeps beam and channel work moving fast.

  • Free test cut on your beam
  • 3-year machine warranty
  • Installed in 80+ countries
  • Factory direct since 2006
PCL H-Series robotic beam coping machine, full view
Sections
H, I, U, L
Web height
100-800 mm
Robot
6-axis
Cutting
plasma + oxy-fuel
Accuracy
±0.5 mm

What the H-Series does

The H-Series beam cutting machine is built around a 6-axis robot and a plasma or oxy-fuel torch. Most of the cutting on a structural member happens at its ends and connections. A beam coping machine takes over that work from the layout table, the hand torch and the grinder. On the H-Series the section rests on the infeed, sensors measure its real position, and the robot cuts each operation in turn from the DSTV file. Because the robot reaches the web and both flanges from one position, an H-beam or channel is finished without being turned or re-clamped.

Beam coping operations

OperationWhat is cut
End copeFlanges and web cut back for beam-to-beam connections
Weld access holeRadiused hole at the web-flange junction
Notch and clipped cornerClearance cuts on beams, channels and angles
BevelWeld preparation on flange and web ends
Bolt holes and slotsIn web and flanges, from the DSTV file
Cut to lengthSquare or mitred ends

Weld access hole shapes and bevel types are covered in our guides to weld access holes and coping and beam bevel cutting.

Specifications

SpecificationDetails
SectionsH-beam, I-beam, channel (U), angle (L)
Web height100-800 mm
Robot6-axis industrial robot
Cuttingplasma and oxy-fuel in one station
Positioning accuracy±0.5 mm
Section measurementsensors compensate for rolling deviation
SoftwarePCL CNC, DSTV import from Tekla
Round pipenot supported (no chuck)
H-Series precision cutting head on the 6-axis robot
Cutting head on the 6-axis robot: plasma and oxy-fuel in one station.

Section length, infeed and outfeed, and the plasma source are configured to your work. Send your largest section and longest member for a quotation.

Get the price and a free test cut

The price depends on your section range, longest member and cutting systems. Send them, or a DSTV file of a typical member, and we reply with a configuration and quotation.

Request a quote WhatsApp your pipe size

H-Series or 8-axis plasma beam cutter?

H-Series coping machine8-axis robotic plasma beam cutter
SectionsH, I, channel, angleH, I, channel, angle, box section, round pipe
Round pipeNo (no chuck)Yes, up to Ø800 mm
CuttingPlasma and oxy-fuelPlasma
Best forHigh throughput on beams and channelsMixed work including pipe

For fine bolt holes and laser-quality bevels, compare the H-beam laser cutting machine.

One system instead of a coping crew

Coping, access holes and bevels on beams are usually marked and cut by hand, then ground to fit. On fabricators’ figures, the H-Series replaces the work of 5 to 8 manual workers with one automated station and one operator, and parts arrive at fit-up ready to weld.

H-Series beam coping video

H-Series robotic coping of H-beams and channels

Plasma and oxy-fuel in one station

Plasma handles the normal range of flange and web thickness with speed and a narrow kerf. For heavy sections with thick flanges, the oxy-fuel torch takes over in the same station, so heavy columns and girders do not need a separate flame-cutting step.

Where it is used

Steel building fabricators

Rafters, columns, purlins and bracing with copes and holes.

Bridge and heavy structures

Cross girders and stiffened members with thick flanges.

Industrial plants

Platforms, pipe racks and equipment supports from channels and angles.

Before you order: what to check

CheckWhy it matters
Section rangeWeb height 100-800 mm; pipe needs the 8-axis machine
Thickest flangeSets the plasma source and whether oxy-fuel will be used
Longest memberSets infeed and outfeed length
Detailing softwareDSTV export from Tekla or similar

Why buy from PCL

  • Since 2006

    Factory in Jinan, China, building cutting machines.

  • 80+ countries

    Machines installed worldwide.

  • Machine warranty

    Consumables are excluded.

  • Free test cut

    On your member before you order.

  • On-site installation

    With operator training.

  • Remote support

    By WhatsApp and video.

Beam cutting machines

All Beam Cutting Machines

Laser, plasma and production lines compared.

Compare all models
8-axis pipe and beam plasma cutting machine

8-Axis Robotic Plasma Beam Cutter

Beams, box sections and round pipe.

View machine
H-beam laser cutting machine

H-Beam Laser Cutting Machine

Fiber laser for H-beams and sections.

View machine
H-beam production line

H-Beam Production Line

Assembling, welding and straightening.

View machine

Frequently asked questions

What is a beam coping machine?

A machine that cuts the ends and connections of structural sections: copes, notches, weld access holes, bevels and bolt holes. The PCL H-Series does this with a 6-axis industrial robot carrying a plasma or oxy-fuel torch.

Which sections can the H-Series cut?

H-beams, I-beams, channels (U) and angles (L) with a web height from 100 to 800 mm. It is built for open sections; it has no chuck and does not cut round pipe.

Why is it faster on H-beams and channels?

The section feeds straight through the station without being clamped in a rotating chuck, and the robot reaches the web and both flanges from one position. For a shop that mainly cuts beams and channels, that means less handling time per member.

How is it different from the 8-axis plasma beam cutter?

The 8-axis machine also cuts round pipe and box sections and suits mixed work. The H-Series is dedicated to H, I, U and L sections for higher throughput on beam and channel work, and adds oxy-fuel for thick flanges.

Plasma or oxy-fuel?

Plasma for normal flange and web thickness, fast and with a narrow kerf. Oxy-fuel in the same station for thick flanges on heavy sections.

How accurate is it?

Positioning accuracy is ±0.5 mm. Sensors measure the real section and compensate for rolling tolerances such as flange tilt and web offset before cutting.

Can it read Tekla files?

Yes. Parts are imported as DSTV files from Tekla Structures and other detailing software; the PCL CNC software turns them into robot paths.

Can it cut bolt holes?

Yes, in the web and flanges. Plasma holes suit most structural bolted connections; where drilled or reamed holes are specified, tell us and we will advise.

Can I get a test cut?

Yes. Send a drawing or DSTV file of a typical member and we cut it at our factory in Jinan and send you the video.

What is the warranty?

3 years on the machine, consumables excluded, with on-site installation, operator training and remote support.

Get a quote and a test cut

Send your section sizes and a typical member. We confirm the configuration, quote it and can cut a sample.

What happens next

  1. An engineer checks your sizes and parts.
  2. You receive the recommended configuration and a quotation.
  3. If you want, we cut a sample and send you the video.
WhatsApp +86 186 6017 4681

Request a quote

Your details are used only to answer this enquiry. Or email info@laser-solution.com.

WhatsApp