CNC cutting & robotic welding systems · Jinan, China · Since 2006info@laser-solution.com

Heavy plate cutting

gantry type cnc plasma cutting machine

Gantry CNC Plasma Cutting Machine for Heavy Plate

A wide-gantry CNC plasma and oxy-fuel cutting machine for heavy plate. Tables up to 8 m wide and 30 m long, plasma cutting from 0.5 to 50 mm, oxy-fuel for thicker carbon steel and a bevel head for weld preparation, all on one gantry.

PCL heavy-duty gantry CNC plasma cutting machine
Cutting width
3–8 m
Cutting length
6–30 m
Plasma thickness
0.5–50 mm
Travel speed
12 m/min
Bevel
up to 45°

See it cutting

The gantry plasma cutting steel plate.

What is inside

01

Wide-track gantry

The gantry runs on rails laid either side of the cutting table, so the bridge can span up to 8 m and the bed can be extended to 30 m. Both ends are driven by AC servo motors through rack and pinion, and the frame is stress-relieved after welding so it stays straight.

A wide track also leaves room to load plate from the side and to put two cutting tables under one gantry: one cuts while the other is loaded.

PCL heavy-duty gantry CNC plasma cutting machine

02

Plasma, oxy-fuel and bevel torches

One gantry carries several torches. Plasma cuts thin to medium plate fast and handles stainless steel and aluminium; oxy-fuel torches take over on very thick carbon steel, and two or more can cut identical parts at the same time.

With the bevel head option the plasma torch tilts up to 45° to cut V, Y and K weld preparations in the same pass as the part.

CNC plasma torch cutting steel plate
CNC plasma cutting samples 03

Automatic height control

Plasma cut quality depends on keeping the torch at the right height over plate that is never perfectly flat. Automatic torch height control reads the arc voltage and follows the plate, which keeps the bevel square and protects the consumables.

The PCL-CNC control imports drawings, nests parts and sets cutting parameters by material and thickness.

Specifications

SpecificationDetails
Cutting width3,000 to 8,000 mm
Cutting length6,000 to 30,000 mm
Plasma cutting thickness0.5 to 50 mm
Plasma sourceHypertherm or LGK
TorchesSeveral plasma and oxy-fuel torches
Bevel headOption, up to 45°
Maximum travel speed12,000 mm/min
DriveDual AC servo, rack and pinion
GuidesHigh-precision linear guides
Height controlAutomatic torch height control
ControlPCL-CNC industrial control
FrameWelded, stress-relieved, wide track

Width, length, plasma source and torch set are configured to your plates. Send your largest plate and thickness range and we confirm the configuration.

Plasma or oxy-fuel on the same machine

PlateTorchWhy
Thin to medium carbon steelPlasmaMuch faster than oxy-fuel, narrow heat-affected zone
Stainless steel and aluminiumPlasmaOxy-fuel cannot cut them
Very thick carbon steelOxy-fuelLow running cost; several torches cut identical parts together
Weld preparationPlasma with bevel headV, Y and K bevels in the same pass as the part

More on bevels: plasma bevel cutting on plate.

Typical work

Steel structuresBase plates, gussets, stiffeners and connection plates for buildings and bridges. Shipbuilding and offshoreLarge plates and bevelled parts for hull blocks and platforms. Heavy machineryThick side plates and frames for construction and mining equipment. Pressure vessels and tanksShell plates and heads with weld bevels cut in place.

Gantry plasma or gantry laser?

Your workBetter fit
Thick plate, edges welded or ground anyway, lowest machine costGantry plasma
Plates wider than 3 m or longer than 12 mGantry plasma (up to 8 × 30 m)
Small holes, fine contours, parts that must fit without grindingGantry fiber laser
Plate plus H-beams and tubeHFT plate, tube and beam laser

For a side-by-side of cutting processes in steel structure work, see cutting methods in steel structure construction.

FAQ

How big a plate can the gantry plasma cut?

Cutting widths from 3 to 8 m and lengths from 6 to 30 m, configured to your plates.

How thick can it cut?

Plasma cuts 0.5 to 50 mm depending on the plasma source. Oxy-fuel torches on the same gantry cut thicker carbon steel.

Can it cut weld bevels?

Yes, with the bevel head option the plasma torch tilts up to 45° for V, Y and K bevels.

Which plasma sources are used?

Hypertherm or LGK, chosen for the thickness range and budget.

Send your plate sizes for a proposal

WhatsApp