CNC cutting & robotic welding systems · Jinan, China · Since 2006info@laser-solution.com

Tube laser cutting machines

Tube Laser Cutting Machines for Round, Square and Rectangular Tube

Manual or automatic loading, two or three chucks, tube only or tube and plate

PCL is a tube laser cutting machine manufacturer in Jinan, China, building fiber laser tube cutting machines since 2006 for pipe, tube and open sections, from the LT240 for furniture and fitness tube up to beam and plate lasers for structural steel. This page compares the range so you can find the right machine for your tube size, wall thickness and volume.

  • Free test cut on your tube
  • 3-year machine warranty
  • Installed in 80+ countries
  • Factory direct since 2006
CNC fiber laser tube cutting machine cutting steel tube
Round tube
Ø20-520 mm
Square tube
to 520 mm
Length
6 / 9 / 12 m
Laser
1.5-30 kW
Loading
Manual or automatic

The range

LT series tube laser cutting machine

LT Series Tube Laser

Round tube Ø20-520 mm, square tube and small sections to 520 mm. Manual loading, 6/9/12 m, 1.5-20 kW.

View machine
Automatic tube laser cutting machine with bundle loader

Automatic Loading Tube Laser

LT series with a chain loader or bundle loader for long runs and unattended shifts.

View machine
LT3 side-mount three-chuck tube laser cutting machine

LT3 Three-Chuck Heavy Tube Laser

Side-mount head, three chucks, zero tail. 240/360/520 mm, 6 or 12 m, 6-30 kW, optional bevel head.

View machine
Tube and plate fiber laser cutting machine

Tube and Plate Laser

One fiber laser with a sheet table and a rotary tube axis.

View machine
HFT laser cutting system for plate, tube and beam

HFT Beam, Pipe and Plate Laser

H-beam, I-beam, pipe and plate on one bed.

View machine
H-beam laser cutting machine

H-Beam Laser Cutting Machine

Large structural sections with bolt holes, copes and bevels.

View machine
3D robot laser cutting machine

3D Robot Laser Cutting

Robot-held laser head for formed and pressed 3D parts.

View machine

Which tube laser fits your work?

Your workMachine
Round and square tube up to 240 mm, mixed jobsLT240
Tube up to 360 or 520 mm, small channels and H-beamsLT360 or LT520
Same tube size for hours, short parts, night shiftsAutomatic loading tube laser
Long or heavy tube, costly material, zero tail waste, weld bevelsLT3 three-chuck heavy tube laser
Sheet parts and tube parts in the same shopTube and plate laser
H-beam, I-beam and heavy structural sectionsH-beam laser or HFT laser
Thick-wall carbon steel pipe with weld bevels5-axis tube plasma cutter (plasma, not laser)

Prices for every model

Prices depend on the model, laser power, tube length and loading. Send your tube sizes and volume, and we reply with a configuration and quotation.

Request a quote WhatsApp your pipe size

Manual loading, chain loader or bundle loader

ManualChain loaderBundle loader
Tubes go onOne at a time, by hand or craneSeveral laid on the chainsAs a whole bundle
Best forLarge sections, varied jobsMixed sizes, open sectionsLong runs of one tube size
OperatorAt the machineRefills during the shiftChanges bundles, empties bins
MachineLT seriesAutomatic loading tube laser

What a tube laser replaces

A CNC tube laser cutter takes over work that used to need a saw, a drill or punch, a milling machine for intersections and a bench for marking out and deburring. The tube is clamped once, the chucks rotate and feed it, and the laser cuts it to length with every hole, slot, notch and joint in place. Parts go straight to bending, welding or assembly, and a stored program repeats the job months later without new jigs.

CutOld wayTube laser
Cut to length and mitresBand sawLaser, any angle
Bolt holes and slotsDrill or punch with a jigSame pass
Saddle and intersection jointsMilling, templates, grindingSame pass, fits first time
Notches for bendingSaw and file by handSame pass
Part marksMarker or stampLaser marking

Laser power and wall thickness

Laser powerCarbon steelStainless steelTypical use
1.5-3 kWto 12-20 mmto 5-8 mmFurniture, fitness, racking, thin-wall tube
4-6 kWto 22 mmto 10-14 mmMachinery frames, structural tube
12 kWto 35 mmto 25 mmThick-wall tube and heavy sections, faster cutting
20-30 kWFor maximum speed on thick wallsLT360 and LT520 (20 kW), LT3 series (to 30 kW)

Figures are maximum production thickness; speeds and gas settings are in the fiber laser cutting speed chart.

Guides

How to buy a tube laser cutting machine

  1. List your tubes. Smallest and largest section, wall thickness, material and the length the tube arrives in.
  2. Count the volume. Parts per month and shifts decide between manual loading and a loader.
  3. Send drawings. 3D tube files or PDF drawings let us estimate cycle times.
  4. Get a test cut. We cut your part at the factory and send the video and photos.
  5. Check the quotation. Model, laser power and brand, loader, software, spare parts, installation and warranty should all be listed.

Why buy from PCL

  • Since 2006

    Factory in Jinan, China, building cutting machines.

  • 80+ countries

    Machines installed worldwide.

  • Machine warranty

    Machine 3 years, laser source 2 years.

  • Free test cut

    On your tube before you order.

  • On-site installation

    With operator training.

  • Remote support

    By WhatsApp and video.

Large H-Beam Plasma Cutting MachineLarge H-Beam Plasma Cutting Machine 8-Axis Plasma Cutting Machine, All-in-One8-Axis Plasma Cutting Machine, All-in-One Robotic Welding SolutionsRobotic Welding Solutions CNC Plate Cutting MachineCNC Plate Cutting Machine 6-Axis Pipe Cutting Machine6-Axis Pipe Cutting Machine H-Beam Production LineH-Beam Production Line CNC plasma and oxy-fuel pipe bevel cutterPipe Bevel Cutting Machine Portable Pipe Cutting MachinePortable Pipe Cutting Machine

Frequently asked questions

What types of tube laser cutting machine does PCL make?

Manual-loading LT series machines with 240, 360 or 520 mm chucks, the same machines with automatic loading, the LT3 side-mount three-chuck heavy-duty series with zero tail, a combined tube and plate laser, and larger laser machines for H-beams and structural steel.

What is tube laser cutting?

A fiber laser cuts a tube while chucks rotate and feed it, so holes, slots, notches and shaped ends are cut along the tube in one clamping. It replaces sawing, drilling and milling of tube.

How do I choose between them?

Start with the largest tube or section, then the wall thickness and the monthly volume. Size sets the chuck, thickness sets the laser power, and volume decides between manual and automatic loading.

What sizes can a tube laser cut?

On the LT series, round tube from Ø20 mm up to Ø240, 360 or 520 mm, and square, rectangular, channel and H-sections up to the chuck size. Larger beams go on the H-beam and HFT laser machines.

What laser power do I need?

1.5-6 kW covers most thin and medium-wall tube. Thick-wall and large sections use up to 12 kW on the LT series, with 20 kW available; the LT3 heavy-duty series takes 6-30 kW. A table of wall thickness by power is on the LT series page.

Is a tube laser better than a saw and drill?

For tube with holes, slots, notches or shaped ends, yes: one machine cuts the length and every feature in one clamping, with no marking-out or jigs. For plain cut-to-length work only, a saw can be cheaper.

Tube laser or plasma?

Laser for thin and medium walls, stainless steel and small features. Plasma for thick-wall carbon steel pipe and weld bevels, where a 5-axis plasma pipe cutter costs less.

Can one machine cut both tube and plate?

Yes. The tube and plate laser has a sheet table and a rotary axis; the HFT laser also handles beams. Dedicated tube machines are faster when tube is most of the work.

Are these tube laser machines for sale for export?

Yes. All models are built at our factory in Jinan and shipped to more than 80 countries, with on-site installation and training.

What is the warranty?

3 years on the machine and 2 years on the laser source, with on-site installation, training and remote support.

Can I get a test cut before buying?

Yes. Send a drawing or 3D tube file; we cut a sample at our factory in Jinan and send you the video.

Find the right tube laser

Send your largest and smallest tube, wall thickness, tube length and monthly volume. We recommend the machine and laser power and can cut a sample.

What happens next

  1. An engineer checks your sizes and parts.
  2. You receive the recommended configuration and a quotation.
  3. If you want, we cut a sample and send you the video.
WhatsApp +86 186 6017 4681

Request a quote

Your details are used only to answer this enquiry. Or email info@laser-solution.com.

WhatsApp