CNC cutting & robotic welding systems · Jinan, China · Since 2006info@laser-solution.com

Infinite Rotary Cutting in Steel Structure Fabrication

A 12 m beam does not fit in one pass on a fixed table. The usual answer is to cut half, unclamp, turn the beam and cut the other half, which adds handling time and introduces a new alignment error at every repositioning. Infinite rotary cutting removes that step: the profile turns continuously while the head stays where the cut is.

The repositioning problem

Every repositioning costs three things:

  1. time, because the machine stops while the operator unclamps and re-indexes
  2. accuracy, because the part is referenced from a new position
  3. labour, because the operation needs a second person on long workpieces

On a 12 m beam with cuts on four faces, the repositioning can take longer than the cutting.

How infinite rotary works

The workpiece is held in a chuck or a roller set that rotates continuously, and the machine’s control keeps the cut path referenced to the rotating surface. The head does not have to travel around the profile; the profile comes to the head.

Two implementation details decide whether it works in practice:

  • Clamping that does not mark the surface. Hard jaws leave marks on finished faces; soft jaws or rollers are used where the surface matters.
  • Support along the length. A long profile that is only clamped at one end will sag and the cut depth will drift. Roller supports follow the rotation.

What it changes in fabrication

Task Fixed table Infinite rotary
Cut a 12 m beam on four faces reposition 3–4 times one set-up
Cope the end of a long profile cut, unclamp, turn, cut continuous
Bevel along the full length limited by table length continuous
Handling labour second operator one operator

The biggest change is not speed on a single cut; it is that long parts stop being a special job.

Where it is worth it

  • beam lines cutting copes and bolt holes on long members
  • tube cutters working with 12 m bars
  • fabricators who regularly handle members longer than the table

It is not worth it for short parts: below roughly 3 m, a standard table with a rotary axis handles the work without the extra support hardware.

Planning the workflow

  1. Confirm the longest member and its weight; that defines the support and the chuck.
  2. Check the floor space for the infeed and outfeed, not just the machine.
  3. Decide who handles the profile at each end; rotary cutting still needs two people on very long parts.
  4. Ask for the clamping method on finished faces before the order.

FAQ

Does infinite rotary cutting need a special table?

It needs a rotating chuck or roller set and support along the length. The table itself can be a standard format.

Can it cut square and rectangular tube?

Yes. Continuous rotation works on any closed profile that the chuck can hold, including square and rectangular tube.

What limits the maximum length?

The support and the infeed space, not the cutting head. Long members need roller supports that follow the rotation.

For the cutting side, see the 3D beam cutting guide and the tube laser cutting machine pages.

WhatsApp